Microjig Matchfit 1/2 In Dovetail Router Bit 1/4 In Shank - Mb-025-0514
The MicroJig MATCHFIT Dovetail Router Bit is specifically designed for the MATCHFIT Dovetail clamps and Dovetail hardware. Its unique design uses the same standard 14 degrees, 1/2-inch profile, but with rounded corners. It routes incredibly clean Dovetail grooves and requires less sanding, making the match fit system faster and easier than ever before. Down Shear - the 8 degrees down Shear utilizes the bit's rotation to evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts.Bottom Round OverThe bottom of the Dovetail Groove Bears the majority of the clamping pressure. The 1/32-inch round over strengthens that bottom corner by removing less material. This is especially important when routing grooves in plywood, as it minimizes the possibility of plies separating.Top Round OverThe 1/16-inch round over at the top of the Dovetail Groove has several functions. Firstly, it prevents tear-out and fuzz, significantly reducing the amount of sanding needed. It also provides a range of tolerance. The bit can be set to a depth anywhere between .365 and .385-inch, and still be fully compatible with the match fit line of products. Within that range, the width of the Groove opening at the top will remain the same, but with a varying round-over exposure. The shallower the Groove, the smaller the round-over, the deeper the Groove, the more pronounced the round-over will be.Laser Cut 3/8-Inch Depth GuideThe depth guideline is exactly 3/8-inch from the end of the carbide Cutter. With the depth guideline even with the surface of the material, the bit will cut a .375-inch deep Groove, which is in the middle of its range of tolerance.Wide BaseThe wide base reduces vibration and noise while routing grooves, resulting in smoother, cleaner cuts.Router Collet Safety LineThe router collet safety line shows how deep into the collet the bit should be. The shank of the bit was designed to be as long as possible, while still fitting into any major manufacturer’s router. This provides more surface area for the collet to grip, reducing vibration for a smoother cut, and minimizing the Risk of the bit loosening and ejecting from the router.
Price now:
From
$29.95
To
$34.99
Price History:
Details:Microjig Matchfit 1/2 In Dovetail Router Bit 1/4 In Shank - Mb-025-0514
The MicroJig MATCHFIT Dovetail Router Bit is specifically designed for the MATCHFIT Dovetail clamps and Dovetail hardware. Its unique design uses the same standard 14 degrees, 1/2-inch profile, but with rounded corners. It routes incredibly clean Dovetail grooves and requires less sanding, making the match fit system faster and easier than ever before. Down Shear - the 8 degrees down Shear utilizes the bit's rotation to evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts.Bottom Round OverThe bottom of the Dovetail Groove Bears the majority of the clamping pressure. The 1/32-inch round over strengthens that bottom corner by removing less material. This is especially important when routing grooves in plywood, as it minimizes the possibility of plies separating.Top Round OverThe 1/16-inch round over at the top of the Dovetail Groove has several functions. Firstly, it prevents tear-out and fuzz, significantly reducing the amount of sanding needed. It also provides a range of tolerance. The bit can be set to a depth anywhere between .365 and .385-inch, and still be fully compatible with the match fit line of products. Within that range, the width of the Groove opening at the top will remain the same, but with a varying round-over exposure. The shallower the Groove, the smaller the round-over, the deeper the Groove, the more pronounced the round-over will be.Laser Cut 3/8-Inch Depth GuideThe depth guideline is exactly 3/8-inch from the end of the carbide Cutter. With the depth guideline even with the surface of the material, the bit will cut a .375-inch deep Groove, which is in the middle of its range of tolerance.Wide BaseThe wide base reduces vibration and noise while routing grooves, resulting in smoother, cleaner cuts.Router Collet Safety LineThe router collet safety line shows how deep into the collet the bit should be. The shank of the bit was designed to be as long as possible, while still fitting into any major manufacturer’s router. This provides more surface area for the collet to grip, reducing vibration for a smoother cut, and minimizing the Risk of the bit loosening and ejecting from the router.
Price now:
From
$29.95
To
$34.99
This site contains affiliate links for which we may be compensated.
Focus Camera & Lifestyle by Focus
0.00% (~ $$v)
New
$29.95
Acme Tools
17.24% (+ $5.00)
New
$34.00
Woodcraft
16.67% (+ $5.00)
New
$34.99
Focus Camera & Lifestyle by Focus | $29.95Free Delivery | Store |
New | $34.00Free Delivery | Store |
Woodcraft | $34.99$6.99 Delivery | Store |
Product Description
The MicroJig MATCHFIT Dovetail Router Bit is specifically designed for the MATCHFIT Dovetail clamps and Dovetail hardware. Its unique design uses the same standard 14 degrees, 1/2-inch profile, but with rounded corners. It routes incredibly clean Dovetail grooves and requires less sanding, making the match fit system faster and easier than ever before. Down Shear - the 8 degrees down Shear utilizes the bit's rotation to evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts.Bottom Round OverThe bottom of the Dovetail Groove Bears the majority of the clamping pressure. The 1/32-inch round over strengthens that bottom corner by removing less material. This is especially important when routing grooves in plywood, as it minimizes the possibility of plies separating.Top Round OverThe 1/16-inch round over at the top of the Dovetail Groove has several functions. Firstly, it prevents tear-out and fuzz, significantly reducing the amount of sanding needed. It also provides a range of tolerance. The bit can be set to a depth anywhere between .365 and .385-inch, and still be fully compatible with the match fit line of products. Within that range, the width of the Groove opening at the top will remain the same, but with a varying round-over exposure. The shallower the Groove, the smaller the round-over, the deeper the Groove, the more pronounced the round-over will be.Laser Cut 3/8-Inch Depth GuideThe depth guideline is exactly 3/8-inch from the end of the carbide Cutter. With the depth guideline even with the surface of the material, the bit will cut a .375-inch deep Groove, which is in the middle of its range of tolerance.Wide BaseThe wide base reduces vibration and noise while routing grooves, resulting in smoother, cleaner cuts.Router Collet Safety LineThe router collet safety line shows how deep into the collet the bit should be. The shank of the bit was designed to be as long as possible, while still fitting into any major manufacturer’s router. This provides more surface area for the collet to grip, reducing vibration for a smoother cut, and minimizing the Risk of the bit loosening and ejecting from the router.
Product Specifications
General | |
|---|---|
Material | plywood |
Size | small |
Brand | Micro Jig, Inc. |
Age group | Adult |
Gender | unisex |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.